Use and Care Manual

110
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Angles & Straps
Angles & Straps
MiTek
®
Product Catalog
MP / MPA / MPF Multi-Purpose Framing Angles
MP34 – Framing angle without tabs
MPA1 – Tabs enable two and three-way connections
MP4F – Connects 2x framing with oor sheathing up to 5/8"
MP6F – Connects 3x framing with oor sheathing up to
3/4". Better choice for connections where oor sheathing
is between sole plate and rim board
Materials: See chart
Finish: G90 galvanizing
Options: See chart for Corrosion Finish Options
Codes: IBC, FL, LA
MP34
MPA1-GC
MPA1 Typical MP34 installation
Typical MPA1
joist / header installation
Typical MPA1
rafter / plate installation
Typical MPF installation
Typical MPA1
stud / plate installation
MPF
Typical MP34
joist / header installation
1-7/16"
1-1/2"
4-1/2"
2-1/2"
1-1/2"
1-7/16"
Embossed plate lines
MP4F=1"
MP6F= 1-3/4"
MP4F=3"
MP6F= 3-3/4"
4-1/4"
Figure 1
Type 1
Figure 3
Type 2
Figure 2 Figure 4
MP6F
V
H
MP4F
MP4F
Sheathing
F3
F2
F3
F1
F1
F3
F2
F3
F1
F1
B1
C1
A1
B2
C2
A2
Continued on next page