Use and Care Manual
118
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Angles & Straps
Angles & Straps
MiTek
®
Product Catalog
SFC Framing Clips
Framing clips replace end cripples under window sills.
Materials: 16 gauge
Finish: G90 galvanizing
Installation:
• Use all specied fasteners. See Product Notes, page 18.
Header Hangers support headers in door and window framing
and help eliminate cracks in drywall, plaster, or stucco over
windows and doors. These products also provide anchorage and
support for heavy fence rails, struts, or gate post cross brackets.
Materials: 16 gauge
Finish: G90 galvanizing
Codes: IBC, FL, LA
Installation:
• Use all specied fasteners. See Product Notes, page 18.
SFC6
HH44
Typical SFC6 installation
Typical HH44 installation
HH Header Hangers
Uplift
Ref. No. W H D Qty Type Qty Type 100% 115% 125% 160%
SFC6 -- 16 5-1/2 2-1/2 2-1/2 5 16d 5 16d 690 795 865 750 --
1) Allowable loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.
2)
NAILS:
16d nails are 0.162" dia. x 3-1/2" long.
Code
Ref.
Fastener Schedule
2
MiTek USP
Stock No.
Steel
Gauge
F1
Sill Stud
DF/SP
Allowable Loads (Lbs.)
1
Dimensions (in)
F2
1
F3
1
F4
1
Ref. No. W H Qty Type Qty Type 100% 115% 125% 160% 160% 160%
HH44 HH4 16 3-9/16 3-1/4 4 16d 9 16d
1325 1500 1620 835 895 1390
HH66 HH6 16 5-1/2 5-1/4 6 16d 12 16d
1765 2000 2160 1025 1345 2400
1) Allowable loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.
2)
NAILS:
16d nails are 0.162" dia. x 3-1/2" long.
New products or updated product information are designated in
blue font
.
Code
Ref.
IBC,
FL, LA
MiTek USP
Stock No.
Steel
Gauge
F1
Header Stud
Fastener Schedule
2
DF/SP
Allowable Loads (Lbs.)
Dimensions (in)
2"
W
H
3-3/4"
W
H
D
Uplift
F1
F4
F4
F2
F3
F1