Use and Care Manual
222
MiTek
®
Product Catalog
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
EWP Hangers
EWP Hangers
H
W
L
TF
D
Top Mount Hanger Charts
Fastener Schedule
5
Uplift
2
DF/SP
Ref. No. Ga W H D L TF Type Qty Type LVL PSL LSL SPF DF/SP
160%
2 - 2-1/8 x 16 TFL2016 ITS2.06/16 -- 18 2-1/8 16 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
2-1/4 - 2-5/16
x 9-1/2
TFL2395 ITS2.37/9.5 -- 18 2-5/16 9-1/2 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
2-1/4 - 2-5/16
x 11-7/8
TFL23118 ITS2.37/11.88 -- 18 2-5/16 11-7/8 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
TFL2314 ITS2.37/14 -- 18 2-5/16 14 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
THO23140 BA2.37/14 -- 18 2-3/8 14 2-3/8 -- 2 4 8 10d 2 10d x 1-1/2 2400 2400 2400 1840 2400 2400 230
TFI3514 MIT3514 -- 16 2-3/8 14 2-1/2 -- 2-1/16 4 2 16d 2 10d x 1-1/2 2715 2715 2715 2080 -- 2715 215
PHM2314 WP2.37 H=14 x 7/10 2-3/8 14 2-1/2 7 3 2 -- 16d 2 10d x 1-1/2 3335 3335 3335 2535 -- 3335 --
TFL2316 ITS2.37/16 -- 18 2-5/16 16 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
TFI3516 MIT3516 -- 16 2-3/8 16 2-1/2 -- 2-1/16 4 2 16d 2 10d x 1-1/2 2715 2715 2715 2080 -- 2715 215
PHM2316 WP2.37 H=16 x 7/10 2-3/8 16 2-1/2 7 3 2 -- 16d 2 10d x 1-1/2 3335 3335 3335 2535 -- 3335 --
TFI3518
BA2.37/18,
MIT3518
-- 16 2-3/8 18 2-1/2 -- 2-1/16 4 2 16d 2 10d x 1-1/2 2715 2715 2715 2080 -- 2715 215
PHM2318 WP2.37 H=18 x 7/10 2-3/8 18 2-1/2 7 3 2 -- 16d 2 10d x 1-1/2 3335 3335 3335 2535 -- 3335 --
TFI3520
BA2.37/20,
MIT3520
-- 16 2-3/8 20 2-1/2 -- 2-1/16 4 2 16d 2 10d x 1-1/2 2715 2715 2715 2080 -- 2715 215
PHM2320 WP2.37 H=20 x 7/10 2-3/8 20 2-1/2 7 3 2 -- 16d 2 10d x 1-1/2 3335 3335 3335 2535 -- 3335 --
2-1/2 x 9-1/4 TFL25925 -- -- 18 2-1/2 9-1/4 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
2-1/2 x 9-3/8 TFL25938 -- -- 18 2-1/2 9-3/8 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
2-1/2 x 9-1/2 TFL2595 ITS2.56/9.5 -- 18 2-1/2 9-1/2 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
2-1/2 x 11-1/4 TFL25112 -- -- 18 2-1/2 11-1/4 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
TFL25118 ITS2.56/11.88 -- 18 2-1/2 11-7/8 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
THO25118 MIT311.88 -- 16 2-9/16 11-7/8 2-3/8 -- 1-15/16 4 6 10d 2 10d x 1-1/2 2370 2370 2370 2095 1835 2370 230
2-1/2 x 13 TFL2513 -- -- 18 2-1/2 13 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
TFL2514 ITS2.56/14 -- 18 2-1/2 14 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
THO25140 MIT314 -- 18 2-9/16 14 2-3/8 -- 2 4 8 10d 2 10d x 1-1/2 2400 2400 2400 1835 2400 2400 230
TFI314 -- -- 16 2-9/16 14 2-1/2 -- 2 4 2 16d 2 10d x 1-1/2 2715 2715 2715 2080 -- 2715 215
PHM2514 WP2.56 H=14 -- 7/10 2-9/16 14 2-1/2 7 3 2 -- 16d 2 10d x 1-1/2 3335 3335 3335 2535 -- 3335 --
TFL2516 ITS2.56/16 -- 18 2-1/2 16 2 -- 1-1/2 4 2 10d 2 10d x 1-1/2 1585 1585 1585 1260 1245 1585 130
TFI316
BA2.56/16,
MIT316
-- 16 2-9/16 16 2-1/2 -- 2 4 2 16d 2 10d x 1-1/2 2715 2715 2715 2080 -- 2715 215
PHM2516 WP2.56 H=16 -- 7/10 2-9/16 16 2-1/2 7 3 2 -- 16d 2 10d x 1-1/2 3335 3335 3335 2535 -- 3335 --
2-1/2 x 18 TFI318
HIT318,
BA2.56/18,
MIT318
-- 16 2-9/16 18 2-1/2 -- 2 4 2 16d 2 10d x 1-1/2 2715 2715 2715 2080 -- 2715 215
2-1/2 x 20 TFI320
HIT320,
BA2.56/20,
MIT320
-- 16 2-9/16 20 2-1/2 -- 2 4 2 16d 2 10d x 1-1/2 2715 2715 2715 2080 -- 2715 215
2-1/2 x 22 TFI322
HIT322,
BA2.56/22,
WP2.56 H=22
-- 16 2-9/16 22 2-1/2 -- 2 4 6 16d 2 10d x 1-1/2 2820 2820 2820 2485 -- 2820 215
2-1/2 x 24 TFI324
HIT324,
BA2.56/24,
WP2.56 H=24
-- 16 2-9/16 24 2-1/2 -- 2 4 6 16d 2 10d x 1-1/2 2820 2820 2820 2485 -- 2820 215
2-1/2 x 26 TFI326
BA2.56/26,
WP2.56 H=26
-- 16 2-9/16 26 2-1/2 -- 2 4 6 16d 2 10d x 1-1/2 2820 2820 2820 2485 -- 2820 215
2-5/8 x 9-1/2 THO26950 -- -- 18 2-11/16 9-1/2 2-3/8 -- 2 4 6 10d 2 10d x 1-1/2 2525 2525 2525 2070 1625 2525 230
2-5/8 x 11-7/8 THO26118 -- -- 16 2-11/16 11-7/8 2-3/8 -- 2 4 6 10d 2 10d x 1-1/2 2370 2370 2370 2115 1835 2370 230
2-5/8 x 14 THO26140 -- -- 18 2-11/16 14 2-3/8 -- 2 4 8 10d 2 10d x 1-1/2 2400 2400 2400 1835 2400 2400 230
2-5/8 x 16 THO26160 -- -- 18 2-11/16 16 2-3/8 -- 2 4 8 10d 2 10d x 1-1/2 2400 2400 2400 1835 2400 2400 230
1) When I-joist is used as a header, all header nails must be 10d (0.148") x 1-1/2.
2) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted
3) Some listed loads may be increased for short-term loading. Refer to MiTek code evaluation reports for details.
4) When I-Joists with flanges less than 1-1/2" thick are used as headers, the reduction factor for 1-1/4" flange is 0.69 and 0.84 for 1-3/8" flange.
5) NAILS: 10d x 1-1/2 nails are 0.148" dia. x 1-1/2" long, 10d nails are 0.148" dia. x 3" long, NA16D-RS nails are 0.148" x 3-1/2" long, 16d nails are 0.162" dia. x 3-1/2" long.
Load tables address hanger/header/fastener limitations only. Joist limitations must be determined for each installation.
New products or updated product information are designated in blue font.
Joist Size
(in)
2-1/4 - 2-5/16
x 14
2-1/4 - 2-5/16
x 16
2-1/2 x 11-7/8
IBC,
FL,
LA
2-1/2 x 14
2-1/2 x 16
2-1/4 - 2-5/16
x 18
2-1/4 - 2-5/16
x 20
MiTek USP
Stock No.
DF
I-Joist
4
Code
Ref.
Web
Stiff
Reqd
Allowable Loads Header Type (Lbs.)
1,3
Dimensions (in)
Header Joist Download 100%
Top
Qty
Face
Qty
Continued on next page