Use and Care Manual

334
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
Cold-Formed Steel Connectors
CFS Connectors
MiTek
®
Product Catalog
MP/S Skewable Angles
MP/S angles are field-adjustable to attach members intersecting at
angles. MP/S angles are load rated and provide adequate thickness
and fastener quantity to the field fabricated clip angles.
Materials: 18 gauge
Finish: G90 galvanizing
Installation:
• Use all specified fasteners.
• Field-adjustable from 45°-180° (flat). Bend angle only once.
• Joist must be constrained from rotation.
MP/S5 MP/S7
Typical MP/S7 installation
(MP/S5 similar)
Typical MP/S7 skew installation
(MP/S5 similar)
MP/S Top View
Shipped
at 80°
Adjustable from
45° to 180° (flat)
bend one time only
Ref. No. Qty
Type
3
MP/S5 S/LS50 18 4 #10 310 410 480
MP/S7 S/LS70 18 6 #10 405 640 745
1) Allowable loads are for one part only.
2) Member mils (33, 43, 54) has been considered as Grade 33.
3) #10 screws are ITW Buildex 10-16 HWH Teks Structural Fasteners with a
nominal diameter of 0.190". Self-drilling tapping screws with equivalent
physical and strength properties may be used.
MiTek USP
Stock No.
--
Code
Ref.
Steel
Gauge
Fastener
Schedule
Allowable F1 Loads (Lbs.)
1
33 mil
2
(20ga)
43 mil
2
(18ga)
54 mil
2
(16ga)
F1
100°
4 5⁄8"
2 1⁄4"
2 1⁄4"
100°
2 1⁄4"
2 1⁄4"
5 7⁄8"