User Manual

ManualsBrandsMitel Deutschland ManualsElectronicsMobile DECT phone with integrated BT connectivity for handset

3938

Devices menu

You can call up the Devices menu in the following ways:

• In Idle mode, press 

• In Idle mode, press and select Menu.

Notes on the display symbols in the menu

Save To make settings in the menu, you must open the respective setting window

with the

softkey. Your entry is then saved with the softkey.

Information You can display further information on the entries with the softkey.

Options You can open further submenus (e.g. Delete, Edit) with the softkey.

Esc

Back

You can cancel entries with the

Esc

softkey and/or go one step back in the

menu.

Calling By pressing the softkey an entry is dialled directly or transferred into pre-

dial.

Overview

Info

This menu provides access to the call list, redial list and the voice box (if available).

Quick access to this information is also possible on the ¦navigation key or via the key.

Active features

You can quickly reach some important settings, such as Bluetooth, Mandown, Call filter, Profiles,

Alarm clock and Appointment, via this menu.

Devices menu

Phone book

Allows access to your personal phone book.

This can also be quickly accessed with the  navigation key or via the key.

Time/Alarms

In this menu you can set the date and time, program appointments and alarm clock times and

define the formats for the date and time display.

Audio

In this menu you can make settings for the volume, ringer and attention tones.

Call filter

The call filter* allows you to answer or block incoming calls. You can specify the call numbers and

the filter status in the menu.

System

In this menu you can specify the active system for your handset and administer registrations to diffe-

rent systems as well as read the IPEI number and information on the status of hardware and soft-

ware.

Settings

Device settings, such as key lock, key programming, user name, display settings, illumination,

Blue-

tooth

etc., are available here.

Protection functions

This menu can be accessed via the PIN (Personal Identification Number). On delivery, it is 0-0-0-0 (4 x

zero). Here you can block the handset (lock), change the PIN, program an emergency number, enter

settings for the alarm sensor (in 630d only) as well as completely or partially reset the handset to its

state on delivery.

* if supported by the system

Devices menu