User Manual

ManualsBrandsMitel Deutschland ManualsElectronicsMobile DECT phone with integrated BT connectivity for handset

Aastra 630d only:

Descriptions of the "Mandown" feature can be found on page 31.

Alarm sensor

Mandown

Status Shows whether "Mandown" is activated or not. Press the

Change

softkey to activate or deactivate.

Auto answer

You can select whether your telephone automatically answers a

call from the selected emergency number in hands-free mode.

Alarm tone You can configure whether or not the pre-alarm should emit an

alarm tone.

Delay You can set the time for how long the device can be non-vertical

before triggering an alarm (off, 2 sec ... 60 sec).

Prealarm You can set the time that should elapse until the actual emergency

call is sent. A call tone increasing in volume (alarm tone) is signal-

led during this time (if not deactivated). The alarm can still be can-

celled during the pre-alarm (off, 5 sec ... 240 sec).

Repeat alarm

If the emergency call is not successful, (e.g. because the line is

busy), it is possible to set after which time a repeated pre-alarm is

sent with subsequent emergency call (off, 5 sec ... 240 sec).

Devices menu

"Profiles" menu

When the handset is delivered it has four profiles with characteristic settings pre-programmed for

the "intended purpose". A fifth profile is available for further settings. You can change all profiles

and rename them if required.

Select

No profile No profile can be used with this setting. The settings you select apply.

Normal Parameters for "normal" use are configured in this profile.

Headset Parameters for using a headset are preset in this profile.

Meeting Parameters for using the handset during a meeting are preset in this profile.

Loud Parameters for use in a particularly loud environment are preset in this profile.

This profile is available for your own use.

Settings Choose one of the profiles to make changes.

Profil name

Change the name of the profile if required.

Ringer volume

Set your preferred ringer volume (off, rising, 1...7).

Ringer device

Configure where or how the ringer should be signalled (loudspeaker, headset,

vibration alarm).

Ringer typeSelect whether the ringer should ring once or repeatedly.

Key click Switch the key click on or off.

Noise detection

Switch the automatic noise detection for a louder ringer on or off.

Loud environment

Adapt the speech quality in a loud environment.

Devices menu