User Manual

OpenMobility SIP Installation, Administration and Maintenance
Aastra DeTeWe Doc-ID: pm-0504 28.11.2006 Page: 26 (52)
If you want to read the configuration parameters from an IP DECT Base
Station set the MAC address and the IP address additionally and press the
“List configuration” button. All parameters will be listed in the OM
Configurator tool.
Press the “Reset configuration" button to clean all input fields and additional
parameters.
3.3 Configuring the OpenMobility Manager
The OMM can be configured via HTTP. The OMM acts as a HTTP server
which binds to port 80 by default. If executed in host mode the port can be
configured via the command line interface.
The configuration data will be either read from the internal flash memory or
from a local file. A local file is only used if specified on the command line on a
PC host.
The configuration file is a human readable ASCII file. Changing the
configuration file outside the OMM is not permitted.
The configuration file can be downloaded and uploaded via the web
interface.
The service access is restricted to one active session at a time and is
password protected.
The browser used for service access has to be at least Microsoft Internet
Explorer 6.0 or Mozilla Firefox 1.0 and must have frame support, JavaScript
and cookies enabled.
3.3.1 Service Login procedure
The OMM allows only one user at a time to configure the system. A user
must authenticate with an user name and a password. Both strings are
checked case sensitive.
Default login and password is “ omm ”.