User Manual

OpenMobility SIP Installation, Administration and Maintenance
Aastra DeTeWe Doc-ID: pm-0504 28.11.2006 Page: 29 (52)
3.3.2.2 Get and add the licence key and PARK number
The second step is to go to the Aastra - DeTeWe License web site and enter
the serial number generated by the first step along with a TAN from your
documentation. This will generate a license key that has to be entered in the
3rd step.
If the license is valid, the warning “Missing License” disappears and the OMM
restarts.
3.3.3 System
3.3.3.1 System settings
The system settings cover global settings for the OpenMobility Manager like
the system name or a system wide authentication code. The authentication
code is used during initial PP subscription as a security option (see chapter
3.3.5).
Encryption and regulatory domain are described in the chapters 3.3.3.1.2 and
3.3.3.1.3.
For monitoring the DECT system behaviour of the OpenMobility Manager a
separate application will be delivered. This tool needs an access to the
OpenMobility Manager which is disabled by default and can be enabled on
the system page.
To allow the prioritisation of Voice Packets and/or Signalling Packets (SIP)
inside the used network the IP parameter ToS (Type of Service) could be
configured here.
The OpenMobility Manager and the RFPs are capable of propagating syslog
messages conforming to /8/. This feature together with the IP address of a
host collecting these messages can be configured.