User Manual

OpenMobility SIP Installation, Administration and Maintenance
Aastra DeTeWe Doc-ID: pm-0504 28.11.2006 Page: 37 (52)
3.3.5 Configuration of Portable Parts
At the Portable Parts web page all configured DECT handsets are sorted by
their number. To keep the list concise, the complete list is split up into sub
lists containing up to 100 handsets. The user can move back and forth in
steps of 100 handsets. Because the browser function can not be used to
search for a certain handset in all sub lists, a search function is available,
which allows to find a handset by a given number or IPEI.
A new PP can be added to the system by pressing the “New” button. The
following popup window appears allowing the configuration of a new PP.
The name and authentication code fields are optional settings. The number
represents the SIP user ID and the name represents the SIP display name.
The DECT authentication code is used during initial DECT subscription as a
security option and can be set here for each PP separately. If it is not
configured the global authentication code on the “System Settings” web page
is used (see chapter 3.3.3.1).
The SIP Authentication User Name is optional. It represents the name which
will be used during SIP authentications. If no name is given the number will
be used instead. The password will be used during SIP authentications.
A similar popup window appears when configuring an existing PP by
pressing the tool icon
. The only difference is the delete subscription
checkbox. If this option is selected, the PP will be unsubscribed.