User Manual

OpenMobility SIP Installation, Administration and Maintenance
Aastra DeTeWe Doc-ID: pm-0504 28.11.2006 Page: 39 (52)
4 Maintenance
4.1 Booter
The booter may be handled via the DHCP option 254 “UPDATE” (see
chapter 3.1.4.1) automatically. In any case you may have direct control to the
booter SW, if you use a telnet user session. A complete description of the
usage of the user shell, you can find in /18/.
4.1.1 Checking the RFP booter version
You can display the version information of the RFP booter using the telnet
interface of an RFP. Check the booter version to determine whether an
update is required to overcome any user issues or to enhance the
functionality.
1. Start a telnet session using the IP address of the RFP.
2. Enter login “ iprfp ” and password “ ommsip/987 ” .
3. Enter flash .
The display will show the software and the hardware level of the RFP.
> flash
version of initial booter : 2.0.12
Version of booter 1 : 3.2.2
Version of booter 2 : 3.2.2
Hardware Revision : 51
MAC address : 00:30:42:08:31:A4
>
4.1.2 Manual update of the RFP booter
You can update the RFP booter manually if there is no opportunity to have an
autonomic update. Please check the booter version to determine whether an
update is required to overcome any user issues or to enhance the
functionality.
1. Start a telnet session using the IP address of the RFP.
2. Enter login “ iprfp ” and password “ ommsip/987 ”.
3. Enter flash_update .
4. Enter flash_update a second time because of the two booter images.
4.2 Site survey measurement equipment
If an IP DECT installation has to be planned, a sufficient distribution of the
RFPs is necessary, which fulfills the requirements for reliable synchronization
and connectivity to the Portable Parts. The site survey kit may help you. It
comprises:
• Scaled layout diagram of the building/premises.
• One measuring RFP with its own power supply.
• A tripod and a battery for the RFP.