User Manual

OpenMobility SIP Installation, Administration and Maintenance
Aastra DeTeWe Doc-ID: pm-0504 28.11.2006 Page: 47 (52)
Following this initialization, the user can carry out the following modifications:
• The trace settings can be modified using the menu item “Options-Event
Mask”. Transmissions to the OMM take place after confirming the settings
with “OK’”.
• A “Config Request” can be sent again to the OMM.
• A log file can be activated.
• By means of various dialogues, the configuration data of the PPs, RFPs
and control modules can be displayed and stored in ASCII files.
The following information is displayed in the tables dynamically:
• Transactions between PP and PABX system. These are displayed in both
tables. Simple transactions are displayed in black on a white background;
during handover, both transactions involved are displayed in white on a
red background.
• The location registration and detach events are displayed in the tables for
approximately 1 – 2 sec after their occurrence (light green background), if
possible. There is no display in the RFP table if there is no column free for
display. If the event has already been displayed, it can be overwritten at
any time. The events are not displayed if they occur during an on-going
transaction. Irrelevant of whether the events are displayed in the tables,
they are always entered in the ‘FP/PP-Events' window and in the log file
(provided that this is open).
The following colour scheme is used for the RFP table display:
RFP grey-blue RFP is not active (not connected or disturbance)
RFP black RFP is active
The data of a RFP are displayed in a dialogue box after clicking on the
respective RFP field in the RFP table. The statistics data of the RFP can be
called up from this dialogue box.
The following colour scheme is used for the PP table display:
PP black: PP is enrolled. It is assumed that the PP can be
reached.
PP blue: PP can presumably not be reached. Detach was
received or when an attempt was made to reach
a PP, the PP did not answer.
PP grey/blue: PP not enrolled.
The PP data is displayed in a dialogue box after clicking on the
corresponding PP field in the RFP table.
The “Sync Info” child window contains all RFPs and shows their
synchronization and relation states to each other. Selecting the RFPs with
the right mouse button the user can change visibility views and can even
force a resynchronization of a RFP.
There are several optional sub windows selectable. They are all listed below
and give some more information about the OpenMobility systems. Mostly
they are statistics and for internal use only.