User's Guide

27 Model / User Guide
Pairing and Unpairing Cordless Handset to Base
Pairing and Unpairing
Cordless Handset to Base
Pairing Handset
All handsets must be paired to a Base
Station. This is performed from both
the base and the cordless handset.
Successful pairing will add the
handset name to the handset list on
the base and synchronize the handset
list from the base to the newly paired
handset. A total of 4 handsets can be
paired to a single 480i CT base.
Note: When performing the handset pairing,
it is recommended that thehandset be
within 3 feet of the 480i CT base.
1. On the 480i CT base press w.
2. Select 11.Handset Pairing
3. Select Pair
Note: If there are already 4 handsets paired
to the base, you will not be able to
select the Pair option.
4. On the 480i CT cordless handset
press Â.
5. Select 7- Hset pairing
Note: If the handset has already been
paired, the softkey will be labelled as
Remove instead of Pair.
Ensure the handset being paired is
within close proximity to the base. It is
recommended that the handset be
within 3 feet from the 480i CT base.
Note: It is recommended that both steps 6
and 7 be executed at the same time.
6. On the 480i CT base, select Done.
7. On the 480i CT cordless handset,
press the softkey for Pair.
Upon success or failure of pairing, one
of the following will be displayed on
the handset and base, respectively:
Successful Pairing of Handset
Failed Pairing of Handset
Options List
Show
Done
9.SIP Settings
10.Phone Status
11.Handset Pairing
Options List
Show
Select
Done
Pair
Remove
Cancel
7 - Hset pairing
´ ½ = Scroll
Pair
Options List
Done
Cancel
Attempting to pair...
Attempting to
pair...
Cancel
Pairing
successful
Pairing failed
Try again
Cancel Pair