Datasheet

QUICK REFERENCE GUIDE
M Mitel (design) is a registered trademark of Mitel Networks Corporation. © 2010, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.
Mitel
5310 IP Conference Unit
Operation with the 5224 and 5220 IP Phones
5310 IP Conference Unit with the 5224 IP Phone (shown) or 5220 IP
Phone
The Mitel 5310 IP Conference Unit comprises a saucer, a side control unit, and a Mitel 5224
or 5220 IP Phone. For information about using the 5310 Conference Unit with the Mitel
5235 IP Phone, see the reverse side of this guide.
Using the 5310 IP Conference Unit with 5224 and 5220 IP Phones
The following procedures can be carried out using either the side control unit  or the
optional remote
.
Turn the Conference Unit On or Off
• Press On/Off button .
The Directional LED
 on the saucer turns on.
Turn Mute On or Off
• Press Mute .
The associated LED turns on/off. The Direction LED  on the saucer turns amber when
Mute is on.
Adjust the Volume
• Press Volume Up / Down arrows  repeatedly.
The Direction LED  turns green each time you adjust the volume. This LED turns amber
when the maximum or minimum volume is reached.
Presentation Mode
Presentation Mode is used when only one individual is speaking to a group. If another
member in the group wishes to speak, disable Presentation Mode. Presentation Mode
minimizes extraneous noise.
Turn the Presentation Mode Feature On
• Start speaking and then press Presentation  so the conference unit will pick up your
voice only.
The associated Direction LED  turns on and starts flashing to indicate that the Conference
Unit is receiving your voice.
Turn the Presentation Mode Feature Off
• Press Presentation  to allow other speakers to be heard during the teleconference.
The associated Direction LED
 stops flashing.
 Side Control Unit  Volume Controls  Presentation Mode
 Optional Remote  Mute Controls  Directional LED
 On/Off Buttons