Instruction manual

Mitel 5540 IP Console - User Guide
44
7. Dial the destination number of the night answer point.
The destination can be an extension, an attendant console directory number, an LDN
number on a console, a hunt group or a Night Bell directory number.
8. Press [S
ET] to confirm the new number or [EXIT] to exit without
making changes.
Displaying the System Identification
A System Identification number may be assigned to your PABX. This number appears on Station
Message Detail Reporting (SMDR) and traffic-measurement reports to identify your system
when central polling equipment is used. It is usually unnecessary to change this number once
it is entered.
To display or change the System Identification:
1. Press Function.
2. Press [A
TT FUNCTION].
3. Press [S
YSTEM IDENT].
4. Enter a new three-digit number if required.
5. Press [S
ET] to confirm the new number.
Displaying the Console Identity
The console has an extension number which extension users can dial instead of "0" (zero) to
call you. You can display the console extension number along with the system software version.
To display the console extension number and the system
software version:
1. Press Function.
2. Press [I
DENTITY].
Accessing Applications
The Application function is primarily used by maintenance personnel or someone responsible
for doing Customer Data Entry (CDE). Access to these functions requires a password.
To access the Application function:
1. Press Function.
2. Press [A
PPLICATION].
Your Communications Department will give you further instructions if you are required to do
any Customer Data Entry.