Instruction manual

Setting/Canceling Call Forwarding
47
Setting/Canceling Call Forwarding
You can set up and cancel Call Forwarding on individual extensions from
the console.
The instructions that follow apply to systems programmed with Split Call Forwarding, which
allows you to specify different destinations for internal and external calls. If your system is
programmed with another type of Call Forwarding, internal and external calls will both go to
the same destination. Note that calls from the console are considered external.
To set or cancel Call Forwarding on an extension:
1. Press Function.
2. Press [A
TT FUNCTION].
3. Press [S
TATIONS].
4. Dial the number of the extension for which you want to set or cancel Call Forwarding.
If you dial an invalid number, press [E
XIT].
5. Press [C
ALL FWD].
6. Do one of the following:
• Press [I
NTERNAL] to set or cancel call forwarding of internal calls.
• Press [E
XTERNAL] to set or cancel call forwarding of external calls.
7. Do one of the following:
• Press [C
ANCEL] to cancel the current call forwarding.
• Dial a destination and then select the type of call forwarding—Always, No Answer, etc.
To return to the main display without making changes, press [E
XIT].
Note: If you enter an invalid extension, for example a Console or Hunt Group extension,
you will hear a re-order tone. This indicates the entry is invalid. You can use [E
XIT]
to back out because the Backspace cursor key will not work. It only works for invalid
station/set numbers.
Note: . If you enter an invalid extension, for example a Console or Hunt Group extension,
you will hear a re-order tone. This indicates the entry is invalid. You can use [E
XIT]
to back out because the Backspace cursor key will not work. It only works for invalid
station/set numbers.