User's Manual

Publish Date:
Document: 41-001316-01 Rev 00
Product Voltage / Current Rating
This product uses an optional power supply rated 48V, 0.31A
Equipment Installation
WARNING: Only trained and qualified personnel should be allowed to install, replace, or service this
equipment. The equipment must be placed indoors and connected to indoor networks only.
General Warnings
The following safety warnings apply:
• Mechanical hazards and electrical shock hazards are possible if you remove one or more of the modules.
There are no operator-serviceable modules. Only qualified personnel should service this equipment.
• This equipment must be connected to a protective ground according to the instructions in this manual.
Improper grounding may result in electrical shock.
• This equipment does not provide safety isolation between any port that is connected to a digital network
termination point or any port to which terminal equipment is connected.
• The wall circuit breaker provides the main protection for this equipment.
Modifications not expressly approved by Aastra Telecom Inc. could void the user’s authority to operate the
equipment.
Safety Certification
The Aastra IP Phone is in compliance with regulations as follows:
 CSA 60950-1 / UL 60950-1
 EN 60950-1: 2006
 AS/NZS 60950:1: 2003 + A3:2008
 IEC 60950-1:2005 2nd Edition
 IEEE CB-Scheme
Contact Aastra
Aastra Telecom Inc.
155 Snow Blvd, Concord, ON, L4K 4N9, Canada
Tel: [phone] – Fax: [phone]
Aastra Telecom Inc UK
Unit B3, Armstrong Mall, Southwood Business Park, Farnborough, Hampshire, GU14 0NR
United Kingdom
Tel: [phone] – Fax: [phone]
www.aastra.com
The information contained in this document is believed to be accurate and reliable at the time of printing. However, Aastra Telecom, Inc.
cannot guarantee the accuracy of printed material after the date published nor can it accept responsibility for errors or omissions.