User's Manual

OpenMobility SIP Installation, Administration and Maintenance
Aastra DeTeWe Doc-ID: pm-0504 28.11.2006 Page: 38 (52)
Note: The authentication code can only be changed if the PP is not
subscribed. The PP name can be changed, but this will not take effect until
the PP is subscribed again.
Deleting of a PP can be done by pressing the trash can icon . A popup
window appears and asks for confirmation.
After adding a PP to the OMM the PP must be subscribed. This is done by
pressing the “Subscribe” button. The OMM will allow a subscription of
configured but not subscribed PPs during the next hour.
During the subscription process the system wide PARK and the
authentication code either configured for the PP or system wide must be
entered in the PP form fields. The PARK is displayed at the PP configuration
page in the top right corner.
If the user wants to find a certain handset then the search function can be
used. A click on the “Search” button provides the following pop-up window.
The user can enter the handsets’ number or IPEI. At least one parameter has
to be set. The entered number or IPEI has to match exactly with a handset’s
number or IPEI. If number and IPEI are given then a handset has to exist in
the OMM’s database whose number and IPEI match both otherwise the
search fails.
If a handset with the specified number and/or IPEI was found then a list is
displayed which has this handset as the first entry. The search function can
also be used to get to the right sub list in one step.