Owner`s manual

12
either indoors or outdoors, the range could be reduced to 160ft.
Thick stone walls will severely affect the range.
The symbol on your handset indicates when you are in range.
If
you move too far away from the Mitel 1000 during a call your phone
will sound an alert tone and will flash.
Connecting Desk Phones
At a minimum, your system will have one Desk Phone. Please
connect it into extension 20. Other Desk Phones connect to
extensions 21, 22 and 23. To do so, plug the phone cord (already
attached to the phones) into the extension sockets on the back of
the Base Unit.
Connecting the Mitel 1000 Base Unit to your existing router
Use the blue WAN cable and connect one end to the WAN port
(located next to the Power port) on the back of the base station.
Connect the other end of the blue WAN cable to an unused LAN
port on the back of your existing router or modem/ router.
Connecting the Power
Connect the power supply between the base unit and a power
outlet. The base unit will turn on automatically once plugged in. It
may take one to 3 minutes for the Mitel 1000 to become active and
ready to use. After the red power LED turns green, please wait 5
minutes to place your first call.