Owner`s manual

69
If there are two or more local codes programmed in the Local
Codes table then the 10 digit local number is stored and dialed for
local calls.
If there is only one local code programmed in the Local Codes table
then the area code is stripped and the 7 digit local number is stored
and dialed.
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key () until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select ‘System’.
Scroll down to Local Codes
Select the index 01-40
Enter the code.
Enter all Local codes.
Day/Night Service
The ‘Day Service’ / ‘Night Service’ feature allows you to change the
extensions which ring on incoming calls, change the Class of
Service at each extension, and change the voice greeting heard by
callers (if you have voicemail installed). These changes can take
place automatically, at pre-programmed times daily, or can be
invoked manually. Furthermore, the system can be programmed to
remain in ‘Night Service’ over the weekend.
To set the automatic start and end times for Night Service
The Automatic ‘Night Service’ feature allows you to set two time
bands in each twenty-four hour intervals; the system then
automatically enters ‘Night Service’.
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key () until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select ‘System’.
Press the Scroll Down Key () until ‘Night Service’ is displayed.
Select ‘Night Service’.
Select ‘Automatic on times'
Select 'On Time 1' to set the first time the ‘Night Service’ turns on
automatically
Select 'On time 2' to set the second time the ‘Night Service’ turns on
automatically.
Select the Automatic Off times and set the two times that ‘Night
Service’ is to turn off
To manually turn on Night Service
The Manual ‘Night Service’ feature enables you to turn ‘Night
Service’ on or off manually. When you turn '‘Night Service’' on, the
'‘Night Service’' ringing and 'Class of Service' come into operation.
At extension 20, select ‘‘Night Service’’.