Specifications

S
X-2000 General Information Guide
6
Revision A 5000309
7
The Application Gateway consists of a computer equipped with system link hardware plus
run-time software which enables applications running on client computers to gain access to
Mitel systems using standard system calls (the MiTAI API). Gateways can be used as MiTAI
CTI development platforms and as Novell Network telephony gateways.
Mitel Networks 3800 Wireless Applications Gateway
The Mitel Networks™ 3800 Wireless Applications Gateway system allows H.323 based IP
devices to be connected to a host PBX system. Typically, a system configuration consists of a
PBX, the 3800 Wireless Applications Gateway system server, and the H.323 wireless telephone
system from Symbol
®
Technologies.
The 3800 Wireless Applications Gateway system is a telephony communications device that
supports Symbol Technologies’ proprietary, wireless H.323 devices. It allows Ethernet, TDM,
and packet-based wireless devices to be connected to a host PBX and H.323 devices (if these
devices meet the expected Mitel parameters) to invoke Mitel features. Features not recognized
by the gateway will not function.
The 3800 Wireless Applications Gateway system can be clustered using the standard Mitel
DPNSS Networking to communicate between multiple NetVision® telephony devices working
on different gateway nodes.
Note: A limited version of this functionality of this software option is also offered as an option on the
3200 Integrated Communications Platform system. Note that this software option and the 3800
Wireless Applications Gateway system are mutually exclusive. Your system can have one of the
two functionalities, but not both.
3800 Ericsson Wireless Assistant Gateway system
The 3800 Ericsson Wireless Assistant Gateway system offers enhanced mobility services for
mobile business users via the intelligent integration of mobile phones and PBX extensions into
one mobile solution. This configuration consists of two major hardware components, the Mitel
Networks 3800 Ericsson Wireless Assistant Gateway system and Ericsson’s Cellular Radio
Exchange (CRE) with Switchboard.
The 3800 Ericsson Wireless Assistant Gateway system is a Windows NT server-based switch
controller, running Mitel Networks 3200 Call Control Software and Ericsson’s DWOS Mobility
software. The 3800 Ericsson Wireless Assistant Gateway system connects to the CRE
switchboard for operations and maintenance of the system and switching of calls to, from and
within the system. Network, system and end-user management are done via a web-browser
interface. The 3800 Ericsson Wireless Assistant Gateway system also provides access to the
enterprise voice mail system.
Cellular Radio Exchange with Switch Board
A sub equipped Cellular Radio Exchange (CRE) with a power card and a switchboard connects
the system to the Ericsson Wireless Assistant Gateway system and directs call traffic. It contains
a non-blocking switch, signal processor for tone detection, functions for voice announcements
and primary rate interfaces (T-1 or E-1) on a single board. The switchboard has its own CPU