Specifications

X-2000 General Information Guide

8 Revision A 5000309

Digital Line Monitor

Single-line Digital Line Monitor

The Single-line Digital Line Monitor (DLM) is used to record voice information from Mitel

DNIC-based digital telephones or consoles on an externally connected tape recorder (not

included). The unit records calls to/from the associated telephone only. The unit can be located

anywhere within the building, wall mounted, or placed under a SUPERSET telephone. No

system programming is required.

A default warning tone is repeated on the line every 15 seconds, which can be heard by all

parties in a monitored conversation and on the recording (the tone can be disabled). The DLM

is transparent to the signals passing between the system and DNIC telephones, unless the

warning tone is enabled.

When power is removed from the DLM, the unit is by-passed internally. The DNIC telephone

or console will continue to work, but the conversation will no longer be recorded.

For installation instructions, see the SX-2000 Install Peripherals section of the Technical

Documentation CD-ROM.

Single-line Digital Line Monitor