Specifications

Periphera
ls
5
0003097 Revision A 3
9
Attendant Consoles
SUPERCONSOLE 1000 Attendant Console
The SUPERCONSOLE 1000 attendant console is used to perform call handling functions as
well as some maintenance and administrative functions (such as moves and changes). The
4-line by 80-character alphanumeric display shows source and destination information, time
and date information, call waiting information, and station information (such as COS and COR
values). Macros can be programmed to facilitate the transfer of calls to voice mail, recover calls
released to the wrong extension, dial frequently called numbers using one button.
The console has
• Fourteen hardkeys
• Four programmable firmkeys (for access to purchased options such as Hotel/Motel)
• Ten softkeys
• A dial pad (for both alphabetic and numeric input)
• Backlit display
• Volume controls
• Integral handset
• Connector for a headset
• An RS-232 serial printer port.
Note: A PKM port is located on the back of the unit which can only be used with the SX-200 system.
For installation instructions, see the SX-2000 Install Peripherals section of the Technical
Documentation CD-ROM.
SUPERCONSOLE 1000 Attendant Console