Specifications

Periphera

0003097 Revision A 4

SUPERSET 7000 Attendant Console

The SUPERSET 7000 attendant console consists of TALK TO card, SUPERSET 400 series

handset, and handset cradle connected to a computer. The TALK TO card uses a standard

DNIC interface to communicate with the system. The SUPERSET 7000 attendant console

connects to the system by using Peripheral Interface cards. These cards provide telephone

trunk and telephone extension information to the console.

The SUPERSET 7000 allows the attendant to switch quickly between attendant functions and

PC functions by pressing a single button.

The console has

• Eight attendant function keys

• One hold key

• Three programmable firmkeys

• Ten softkeys

•A dial pad

• Volume and arrow keys

• Integral handset.

The SUPERSET 7000 application runs on a customer-supplied computer that meets the

following minimum requirements:

• 80486/66 MHz processor with 16MB of RAM and Windows 3.1. (A Pentium processor with

Windows 95 and 16MB of RAM are recommended.)

•VGA monitor

• 3½ inch floppy drive

• An AT 101 enhanced keyboard

• An ISA slot for the TALK TO card

• A Sound card is optional; having one allows you to adjust the console ringer volume and

cadence.

Note: The SUPERSET 7000 application will not run under Windows NT or Windows 98.

For installation instructions, see the SX-2000 Install Peripherals section of the Technical

Documentation CD-ROM.