Specifications

X-2000 General Information Guide

8 Revision A 5000309

DNIC Music On Hold/Pager Unit (DMP)

The DNIC Music On Hold/Pager (DMP) unit interfaces a port on the DNI Line card to

• an external music source for Music On Hold

• an external paging amplifier for Paging.

The unit is powered by the system and does not require a separate power source. A single

25-pair amphenol cable connects to the system via the main distribution frame (MDF); the unit

can be wall-mounted. A single LED indicator provides basic status information.

Each DMP supports one music source and one paging zone, and the system supports one

music source and 16 paging zones (15 individual zones and 1 "all" zone). If you need more

than one paging zone, you can use multiple units; for example, for 16 paging zones, you need

16 DMP units.

Note: You can combine E&M paging with DMP Paging.

For installation instructions, see the SX-2000 Install System section of the Technical

Documentation CD-ROM.

DNIC Music On Hold / Pager Unit