Specifications

Feature
s
5
0003097 Revision A 5
1
Attendant Recall Attendant Recall automatically alerts the attendant when a trunk call has been
extended to an idle station and not answered within a specified time-out period
or when a call on Hold at the console has not been answered within a selected
time.
Attendant Ringer Control Attendant Ringer Control lets you mute the attendant console ringer. When the
attendant console ringer is muted, incoming calls continue to be indicated by the
Call Waiting prompt at the top of the display.
Attendant Scratch Pad The Attendant Scratch Pad is your own personal telephone directory and Speed
Dial list. Use it to save telephone numbers for faster dialing or to store the
names and numbers of callers for future reference.
Attendant Serial Call Attendant Serial Call automatically returns a call to the attendant console when
the caller finishes with the called party.
Attendant Setup and
Cancellation of Station
Features
The attendant can setup and cancel certain station features such as Call
Forward, Do Not Disturb, Callback, and Reminder.
Attendant Station Busy-Out See Attendant Busy-Out (Station), page 49.
Attendant System Login The attendant has Terminal access to some system programming functions
from the attendant console. To access these programming functions, the
attendant must log on.
Attendant Tone Signaling Attendant Tone Signaling lets the attendant send tones over the circuit once a
call has been established.
Attendant Trunk Group Busy
Status
Attendant Trunk Busy Status Display lets you display and/or print the busy
status of the system trunk groups from the attendant console.
Auto-Answer Auto-Answer lets you automatically answer calls that ring your Prime line.
Auto-Hold Auto-Hold lets you automatically place an active call on Hold when you press a
line key to originate or receive another call.
Automatic Route Selection
(ARS)
Automatic Route Selection (ARS) simplifies local and long distance dialing by
automatically selecting the most convenient and cost-effective route and by
inserting and/or deleting the proper routing digits.
Broadcast Groups See Groups - Key System and Multicall, page 55.
Broker’s Call Broker’s Call lets you temporarily suspend a telephone call while you originate
a new call. Once the new call has been established, you can alternate between
the two calls.
Busy Dial Through Busy Dial Through lets you dial a Feature Access code sequence when a busy
condition is encountered. See Callback, page 52, and Camp-on, page 53.
Busy Override See Override, page 57.
Calculator Calculator lets you use your telephone as a basic four function calculator by
using the telephone keypad, display, and softkeys.
Calibrated Flash See Flash - Calibrated, page 54.
Standard Features (continued)
Page 3 of 12