Specifications

S
X-2000 General Information Guide
5
6 Revision A 5000309
7
Line Appearance Ring Types Each line appearances can be programmed to ring in a different manner.
Maintenance The SX-2000 system provides extensive maintenance coverage. All types of
peripheral hardware are periodically tested by the system. Maintenance users
may also test individual circuits on demand.
Meet Me Answer Meet Me Answer lets paged parties respond to a Group Page even if they do
not know the identity or location of the paging party.
Messaging - Advisory Messaging - Advisory lets you select a short advisory message to show display
set users who call your telephone.
Messaging - Callback Callback Messaging lets you leave a callback message on a telephone when
the called party is busy or does not answer. When you receive a callback
message, you can review the message on the display (if applicable) and/or call
the sender back.
Messaging - Dialed Dialed Messaging lets you leave a message waiting indication on a telephone.
When you receive a message waiting indication, you call your message taker to
accept the message.
Mixed Station Dialing Mixed Station Dialing lets you use both rotary dial and DTMF telephones within
the system and on the same line.
Multicall Groups See Groups - Key System and Multicall, page 55.
Multiple Consoles See Attendant Consoles (Multiple), page 50.
Music Music lets you listen to the Music On Hold music source through the speaker of
the telephone.
Music On Hold Music On Hold provides callers with music while they are waiting for a call to be
completed. Music On Hold is provided when a call is on Hold, when a call is
transferred to a busy party, or is in Call Waiting. The music source is provided
by the customer.
Networking The SX-2000 system supports both analog and digital networking. See Node ID
Recognition, page 56, and Uniform Numbering Plan, page 60.
NI3 Calling Name Delivery NI3 Calling Name Delivery allows the called party to see the name of the caller
on the telephone display screen if the caller has programmed Calling Name to
"Allow" through IMAT. The NI3 feature supports both incoming and outgoing
calls for the PRI card and the ISDN Network Gateway, page 9.
Night Service Night Service lets you redirect calls to alternate answer points for individual
trunks. The answer point used depends on the selected mode of operation
(Day, Night 1, or Night 2).
Night Service - Automatic Automatic Night Service places the system into Night service automatically if all
attendant consoles are unable to receive calls or if all attendant consoles are
inactive and the time-out period has expired.
Node ID Recognition Node ID Recognition lets a system in a network determine if an incoming call
applies to it or to another system in the network.
Non-Busy Station Non-Busy Station lets you program an extension never to return busy tone. This
feature is used for special situations (e.g., as emergency stations).
Standard Features (continued)
Page 8 of 12