Specifications

Capacity Levels, Software Configurations, and Dimension
s
5
0003097 Revision A 8
5
Other Parameters
The parameters described below are also features that are provided with each MFRD package;
however, the resource limitations for these features are not MFRD dependant (i.e. the maximum
resource values remain consistent across all MFRDs).
Consoles Per Attendant Console Group - The maximum number of attendants in each
attendant console group is 15.
Sets per Broadcast Group - The maximum number of telephones per broadcast group is 16,
20, 24, 28, or 32 (depending on the purchased option).
Call Progress Tone Plans - Call progress and supervisory tones generated within the system
are programmed to meet the requirements of the telephone authority of the country in which
the system is installed. The tones generated are not programmed by the installer; they are part
of the country option of the core package software load. The system provides 100 different
tone plans.
Conferees per Conference - The maximum number of conferees per conference is 8 (any
combination of internal or external conferees as long as one is internal).
Conferees Per System - Without the Conference card, the maximum number of conferees
per system is 24 (at one time). With the Conference card, the maximum number of conferees
per system is 64.
Conferences Per System - Without the Conference card, the maximum number of three-party
conferences per system is 8. With the Conference card, the maximum number of conferences
per system is 21.
Dataset Circuit Descriptors - Dataset circuit descriptors are used to define dataset circuits
by specifying the parameters used by the various datasets supported by the system. One circuit
descriptor is assigned to each similarly configured groups of dataset circuits. Default dataset
descriptors for specified device classes and usage types may be used, or individual parameters
may be programmed. A total of 32 dataset circuit descriptors may be programmed.
Datasets Per Dataset Group - The maximum number of datasets that can be programmed
into one dataset hunt group is 50.
Day Zones per Week - There are 3 day zones available, and each of the day zones can be
divided into 4 time zones (12 individual day/time zones). These zones are used with the
Automatic Route Selection (ARS) feature and the
Advanced Automatic Route Selection feature
package (MSA 2) to implement Day and Time Zones.
DTE Terminal Profiles - DTE (data terminal equipment) terminal profiles are used with the
advanced data application. There are 16 DTE terminal profiles available.
Sets per Hunt Group - The maximum number of telephones allowed in each hunt group is 64;
however, with ACD 2000 hunt mode at MFRD 12 or higher, up to 150 telephones may be
programmed in one hunt group.