Technical information

Maintenance Commands
91
Maintenance
Commands
Main Control Commands
Switching Activity (Redundant Systems Only)
ACTivity FREeze ON/OFF
(Introduced in P02.3.2)
Freezes activity switching between planes. You cannot use
this command to disable Activity Freeze if it was enabled
from the control panel. You also cannot use the control panel
to disable Activity Freeze if it was enabled by this command.
ACTivity FREeze STATUS
(Introduced in P02.3.2)
Displays activity freeze status.
ACTivity Switch <plid>
Makes the redundant control card at the specified PLID
active.
ACTivity Switch Force
Forces an activity switch on a partitioned system.
Scheduling an Activity Switch (Redundant Systems
Only)
ACTivity Switch Schedule
<DAILY or day of week> <hh:mm:ss>
<MONTHLY> <week # [1-4]> <day> <hh:mm:ss>
<YEARLY>
<month> <week # [1-4]> <day> <hh:mm:ss>
Schedules an activity switch on the specified day at the
specified time.