Technical information

Maintenance Commands

Maintenance

Commands

FIRmware ALLEprom

Lists the firmware in all cards that are equipped with EPROM

software.

FIRmware PLID <plid>

Lists the firmware for the card at the specified PLID.

FIRmware Cardtype <card type>

Lists the firmware for all cards of the specified type.

FIRmware PAnel

Lists the firmware in the control panel and mass storage

devices.

Using the FIRM KILL command:

! Use with caution. This command updates the

firmware on all devices that support firmware

download. The device will be out of service until the

firmware update is complete.

! Issue the FIRM KILL command to fewer ports at a

time to diminish process times and avoid the

possibility of overlap.

! Before using the FIRM KILL command:

- Set ACTivity FREeze ON to disable Activity

Switch/Programmed Reboot

- Issue the BACkground OFF DNI command to

disable self diagnostics for the DNI ports only.

! Set ACTivity FREeze OFF and BACkground ON

DNI after the firmware upgrade is complete.

FIRmware KILL ALL

Use with caution. This command updates the firmware on all

devices that support firmware download. All devices will be

out of service until the firmware update is complete.