Technical information

Maintenance Commands
95
Maintenance
Commands
Testing PCM Links
PCM STATUS <Tx or Rx> <link number>
Shows the status of a PCM circuit switch link.
PCM TEst Both <link>
Tests all channels on a PCM circuit switch link. The system
should report zero faults.
PCM TOtals
Reports on all circuit switch links in the system. The system
should report zero faults.
Scheduling a System Reboot (Non-redundant Systems)
PROGrammed Reboot SCHedule
<DAILY or day of week> <hh:mm:ss>
<MONTHLY> <week # [1-4]> <day> <hh:mm:ss>
<YEARLY>
<month> <week # [1-4]> <day> <hh:mm:ss>
Schedules a software controlled system reboot on the
specified day at the specified time.
PROGrammed Reboot Memory Daily <hh:mm:ss>
A software controlled reboot takes place at the next
occurrence of the specified time. This default setting will only
reboot if there is memory fragmentation. To force a system
reboot at a scheduled time, use the previous command.
PROGrammed Reboot Display
Displays the reboot schedule.
PROGrammed Reboot ON/OFF
Turns automatic system reboot on or off.