Technical information

Technician’s Handbook
106
Finding the Directory Number of a Set or Trunk
LOCate PLID <plid>
Gives the directory number of the set or trunk at the
specified PLID.
Finding Free Directory Numbers or PLIDs
LOCate FIRST FREE PLID <card type> <plid
start> TO <plid end>
(Introduced in P07.2.1)
Identifies the first available PLID in a range.
Note: Valid <card type> qualifiers are: ONSLINE, OPSLINE,
CEPT, DS1, DNILINE, E_AND_M, SCDCTRUNK,
COVLINE, DATASTATION, AC15, DIGITALLINE, LS/GS,
DID2, LOOPDID, DID3, or ANYCARDTYPE.
LOCate ALL FREE PLID <card type> <plid start>
TO <plid end>
(Introduced in P07.2.1)
Identifies all available PLIDs in a range.
LOCate FIRST FREE DN <dn start> TO <dn end>
EXT
(Introduced in P07.2.1)
Identifies the first available unassigned directory number in
a range.
Note: The EXT qualifier at the end of the command string
will cause directory number searches to include those DNs
containing
*
and/or # characters.
LOCate ALL FREE DN <dn start> TO <dn end>
EXT
(Introduced in P07.2.1)
Identifies all available unassigned directory numbers in a
range.