Technical information

Technician’s Handbook
108
Digital Trunk Commands
Displaying the Status of a Digital Link
DTstat Read <plid>
Gives the status of a digital link that connects to a DS1 or
CEPT Formatter card.
Note: <plid> = <cab> <shelf> <slot> <hybrid or link>.
DTstat Read APNss Group <number>
Gives the status of an APNSS link that is controlled by a DS1
or CEPT Formatter card.
DTstat Clear <plid>
Clears performance statistics for a specified digital link.
Note: <plid> = <cab> <shelf> <slot> <hybrid or link>.
Testing Digital Trunks
BUsy APNss Group <#> Traffic/Signalling/All
Places the circuits in the specified APNSS group into busy
state.
BUsy <plid of CEPT or DS1 Formatter card>
<hybrid>
Places the specified CEPT or DS1 hybrid into busy state.
TEst APNss Group <#> Traffic/Signalling/All
Tests the trunks in the specified APNSS group.
TEst <plid of CEPT or DS1 Formatter card>
<hybrid or link>
Tests a single hybrid (link on a DS1 or CEPT Formatter
card).