Technical information

Maintenance Commands

109

Maintenance

Commands

RTS <plid of CEPT or DS1 Formatter card>

Returns busied circuits to service in the specified trunk

group.

RTS APNss Group <#> Traffic/Virtual/ALL

Returns busied APNSS group circuits to service.

Synchronizing the Active Clock Source

NEtsync SEtsource <source #>

Forces the system to synchronize its clock with the one

supplied by the specified source number.

NEtsync SEtsource FREERUN

Stops the system from synchronizing to any of the external

sources.

NEtsync SEtsource AUTO

Allows the system to choose the most reliable sync source.

Displaying Synchronization Information

NEtsync STate

Lists the state of the sync source.

NEtsync SUmmary <shelf # of synch source>

Gives a performance history of the sync sources that the

system has used. Enter this command from the active plane.

For the shelf # of synch source parameter, enter 1 if plane A

is active and 2 if plane B is active.