Technical information

Technician’s Handbook
130
Redundant Systems
1. Hold down PANEL ENABLE and press ACTIVITY
FREEZE ON.
2. Enter PARTITION first from the active plane and then
from the inactive plane.
3. From the inactive plane, enter:
DBMS FLAG OFF.
4. Hold down PANEL ENABLE and press the inactive
plane’s RESET button.
5 Log on to the inactive plane and select maintenance
mode.
6. Insert the datasave RSD into the RSD drive.
7. Enter:
VOL MOUNT RSD
Read the volume name of the RSD from the system
response on the maintenance terminal.
8. Enter:
DATA RESTORE ∗.<volume name of RSD>
If this message appears:
Delete old log file? (Yes/No)
Enter YES.
This message appears:
Existing Data Save will be deleted from Harddisk. Continue?
(Y/N)
Enter YES.
This message appears:
Restore system dimensions from saved data?
Enter NO.
9. If you have the Flexible Dimensioning option, this
message may appear, if not skip to step 10:
Custom Dimensions have been detected:
Overwrite the current dimensions? (y/n)
15 min