Technical information

Technician’s Handbook
142
3. Hold down PANEL ENABLE and press ACTIVITY
FREEZE ON.
4. Enter PARTITION first from the active plane then from
the inactive plane.
5. Enter FILE STAT RED from both planes. Both planes
should be isolated. But, you can continue with this
procedure providing that the active plane is isolated.
6. From the active plane, enter:
VOL SET SYSUSER READ ONLY
7. Log on to the inactive plane and select maintenance
mode.
8. Enter:
VOL DISMOUNT SYSUSER
9. Enter:
VOL FORMAT DISK SYSUSER LOAD $8000 REDUN
$10000 SCRATCH.
If this message appears:
FS info: Continue?
Enter YES
When formatting is complete, this message appears:
FS info: Formatted volume on device DISK with name
SYSUSER
10.Enter:
VOL RESTORE SYSUSER FROM OTHER
When restoration is complete, this message appears:
FS Info: Restored volume from other with name sysuser.
11.From the active plane, enter:
VOL SET SYSUSER READ WRITE
12.Hold down PANEL ENABLE and press the inactive
plane’s RESET button.