Technical information

Technician’s Handbook
162
RSD Copier Functionality
To download a software image from the Mitel support web
site onto a laptop, connect the computer to the ethernet port
of the SX-2000 MCIIIE card, and copy the image to the PBX
RSD (removable storage device).
These commands are valid only on a switch with an MCIIIE
card programmed with the IP CONFIG command and with
an Ethernet (RJ45) connection to an ftp server (e.g. a
laptop).
A valid IP address must be assigned to the SX-2000. The IP
adress of the laptop must be assigned, as well as a user
name and password for an FTP user on the laptop. The
laptop must be configured with an FTP server.
To create and apply an upgrade or update software load:
1. Download the image file from the Mitel web site onto a
laptop.
2. Take the laptop to an SX-2000 and attach it to the
Ethernet port of the MCIIIE card.
3. Insert a formatted RSD into the RSD drive.
4. Enter the following command:
RSD COPY FROM NET <filename>Copies the file from
the network computer onto the RSD.
To copy a formatted RSD onto another RSD:
1. Issue the following command:
RSD COPY TO NET <filename>Copies an RSD to a
network computer. When the
process is complete there will be a
<filename> on the ftp server of
131032576 bytes.
RSD COPY FROM NET <filename>Copies the image
from the network PC to SX-2000
RSD.