Technical information

Routine Maintenance
175
Routine
Maintenance
• Enter NO
These messages appear:
Currently restoring: SMDR Options Assignment
Currently restoring: DTE Session Profile Assignment
•
•
Currently restoring: Traffic Options Assignment
Data Restore Complete
• Skip to step 12 if you are not using the Flexible
Dimensions option.
5. Enter the MITEL OPTIONS PASSWORD (from the
SX-2000 Feature Options Record sheet received with
the software).
If you have the Flexible Dimensions option, this message
may appear:
Custom Dimensions have been detected:
Overwrite the current dimensions? (y/n)
Enter YES
This message appears:
Restart the system to enable the RESTORED dimensions.
DATA SAVE/RESTORE/CONVERT is terminated.
6. Remove the datasave RSD from the RSD drive.
7. Hold down PANEL ENABLE and press A RESET.
This restores the dimensions from the saved data. The system
is reset to enable the options on the system.
8. Re-insert the datasave RSD in the RSD drive.
9. Log on to the system and select maintenance mode.
10.Enter:
VOL MOUNT RSD
Read the volume name of the RSD from the system
response on the maintenance terminal.
11.Enter:
DATA RESTORE ∗.<volume name of RSD>