Technical information

Technician’s Handbook

180

4. Restore the database from RSD to the inactive plane.

5. Copy the software to the other plane and JOIN the

system.

Save the Database to RSD

1. Save the database to RSD. See Making a DATA SAVE

Backup on page 164.

2. If you have the Message Center option, perform a

Message Center backup on page 165.

Load the Operating System Software from RSD to the

Inactive Plane

1. Hold down PANEL ENABLE and press ACTIVITY

FREEZE ON.

2. Enter PARTITION first from the active plane, then from

the inactive plane.

3. Insert the software RSD in the RSD drive.

4. Hold down PANEL ENABLE and press the inactive

plane’s RESET button.

5. Log on to the inactive plane and select maintenance

mode.

6. If you are upgrading from software previous to Q26.13.1,

proceed to step 7;otherwise, proceed to step 8.

7. Enter:

FILE DIS RED

This message appears:

FS error: File system redundancy could not be disabled.

Reason: No such volume.

FS warning: Local disable can be attempted (Note: can lead to

FS corruption).

FS info: Continue? (yes/no)

Enter YES

10 min