Technical information

Routine Maintenance
181
Routine
Maintenance
This message appears:
FS info: File system redundancy disabled.
DBMS warning: Unable to read/write state file. Reason: Node
does not exist.
DBMS error: Download failed. Reason: Node does not exist.
8. Enter:
VOL DISMOUNT SYSUSER
This message appears:
FS info: Dismounted volume from device DISK with name:
SYSUSER
9. Enter:
VOL FORMAT DISK SYSUSER LOAD $8000 REDUN
$10000 SCRATCH
If this message appears:
FS info: Continue?
Enter YES
When formatting is complete, this message appears:
FS info: Formatted volume on device DISK with name
SYSUSER
10.Enter:
VOL RESTORE SYSUSER FROM RSD
When the system has copied the system software from
the RSD to the hard disk, this message appears:
FS info: Restored volume from device RSD with name:
SYSUSER
11.Remove the software RSD from the RSD drive.
12.Hold down PANEL ENABLE and press the inactive
plane’s RESET button.
13.Log on to the inactive plane and select maintenance
mode.
14.Re-insert the software RSD in the RSD drive.
15.Enter:
VOL MOUNT RSD
Read the volume name of the RSD from the system
response on the maintenance terminal.
5 min
RSD 20 min
Tape 60 min