Technical information

Technician’s Handbook
184
4. If you are loading software P02.3.2 or later, enter:
DATA RESTORE ∗.<volume name of RSD>
If you are loading software earlier than P02.3.2, see Data
Restore or Data Convert? on page 168 to determine
which command to use in this step.
This message appears:
Existing Data Save will be deleted from Harddisk. Continue?
(Y/N)
Enter YES
The following messages appear:
FS info: Deleting files from catalog ∗.DR.CONFIG
FS info: Deleting file ∗.DR.CONFIG.TIMESTAMP
•
•
If your software is load P02.3.2 or later, this message appears
Restore system dimensions from saved data?
If you have NOT enabled new options
• Enter YES and proceed to step 5
If you HAVE enabled new options or entered options
manually
•Enter NO
These messages appear:
Currently restoring: SMDR Options Assignment
Currently restoring: DTE Session Profile Assignment
•
•
Currently restoring: Traffic Options Assignment
Data Restore Complete
• If you are not using the Flexible Dimensions option,
skip to step 13.
5. Enter the MITEL OPTIONS PASSWORD (from the
SX-2000 Feature Options Record sheet received with
the software).
If you have the Flexible Dimensions option, this message
may appear:
RSD 15 min
Tape 60 min