Technical information

Routine Maintenance
185
Routine
Maintenance
Custom Dimensions have been detected:
Overwrite the current dimensions? (y/n)
Enter YES
This message appears:
Restart the system to enable the RESTORED dimensions.
DATA SAVE/RESTORE/CONVERT is terminated.
6. Remove the datasave RSD from the RSD drive.
7. Hold down PANEL ENABLE and press the inactive
plane’s RESET button.
8. Log on to the inactive plane and select maintenance
mode.
9. Enter:
PARTITION
10.Re-insert the datasave RSD in the RSD drive.
11.Enter:
VOL MOUNT RSD
Read the volume name of the RSD from the system
response on the maintenance terminal.
12.Enter:
DATA RESTORE ∗.<volume name of RSD>
This message appears:
Delete old log file? (Yes/No)
Enter YES
This message appears:
Existing Data Save will be deleted from Harddisk. Continue?
(Y/N)
Enter YES
These messages appear:
FS info: Deleting files from catalog ∗.DR.CONFIG
FS info: Deleting file ∗.DR.CONFIG.TIMESTAMP
•
•
Restore system dimensions from saved data?
Enter NO
These messages appear:
RSD 15 min
Tape 60 min