Technical information

Technician’s Handbook
186
Currently restoring: Form Access Authorization
Currently restoring: Cabinet Assignment
•
•
Currently restoring: Traffic Options Assignment
DATA RESTORE Completed.
Reminder: DBMS SAVE will save the database.
13.Enter:
VOL DISMOUNT <volume name of RSD>
14.Remove the datasave RSD from the RSD drive.
15.Enter:
TYPE ∗.DR.LOGFILE_1
Review the log for data that has not been restored. Do
not proceed to the next step until lost data has been
re-entered. Lost data may have to be re-entered
manually.
16.Enter:
DBMS SAVE
These messages appear:
DBMS Info: Starting DBMS save
DBMS Save Info: 10% complete
DBMS Save Info: 20% complete
•
•
DBMS Info: Save Completed
If progress messages do not appear and
Save Completed appears almost immediately, your redundant
file system is corrupted (see page 128).
17. If your software is earlier than P02.3.2 AND you have the
Property Management System (PMS) option, hold down
PANEL ENABLE and press the newly inactive plane’s
RESET button.
18.Hold down PANEL ENABLE and press ACTIVITY
SWITCH. Service is lost for 5 to 15 minutes.
19.From the active plane reload the software into all
peripheral processors, DSU cards, DNI line cards, and
10 min
15 min