Technical information

Technician’s Handbook
188
OR
This message may appear:
FS info: File system redundancy disabled.
DBMS warning: Unable to read/write state file. Reason: Node
does not exist.
DBMS error: Download failed. Reason: Node does not exist.
7. Enter:
VOL DISMOUNT SYSUSER
This message appears:
FS info: Dismounted volume from device DISK with name:
SYSUSER
8. Enter:
VOL FORMAT DISK SYSUSER LOAD $8000 REDUN
$10000 SCRATCH
If this message appears:
FS info: Continue?
Enter YES
When formatting is complete, this message appears:
FS info: Formatted volume on device DISK with name
SYSUSER
9. Enter:
VOL RESTORE SYSUSER FROM OTHER
When the active plane’s software has been copied to the
inactive plane’s hard disk, this message appears:
FS info: Restored volume from OTHER with name
SYSUSER.
10.Log on to the active plane and enter:
VOL SET SYSUSER READ WRITE
11.Remove the software RSD from the RSD drive.
12.Hold down PANEL ENABLE and press the inactive
plane’s RESET button.
13.Log on to the inactive plane and enter:
JOIN
Wait for this message to appear:
JOIN COMPLETE.
20 min
10 min