Technical information

Routine Maintenance
199
Routine
Maintenance
15.Quit the form.
16.Select maintenance mode and enter:
DBMS FLAG OFF
17.Hold down PANEL ENABLE and press the inactive
plane’s RESET button.
18.Log on to the inactive plane and select maintenance
mode.
19.Insert the datasave RSD in the RSD drive.
20.Enter:
VOL MOUNT RSD
Read the volume name of the RSD from the system
response on the maintenance terminal.
21.Enter
DATA RESTORE ∗.<volume name of RSD>
This message appears:
Delete old log file? (Yes/No)
Enter YES
This message appears:
Existing Data Save will be deleted from Harddisk. Continue?
(Y/N)
Enter YES
These messages appear:
FS info: Deleting files from catalog ∗.DR.CONFIG
FS info: Deleting file ∗.DR.CONFIG.TIMESTAMP
•
•
If your software is load P02.3.2 or later, this message
appears:
Restore system dimensions from saved data?
Enter NO (options have been input previously)
If you have enabled Hotel options, this message
appears:
Restore Hotel/Motel wake-up and room status data? (yes/no)
RSD 15 min
Tape 60 min