Technical information

Installation

Peripheral Cabinet Card Layout

Figure 5: Peripheral Cabinet Card Layout

Note: Depending on the peripheral cabinet type, slots 16, 16B, and 17 may be used

for different card configurations:

Type A - (9400-200-110-NA) - holds a PSC in slot 16, a PRC in the upper por-

tion of slot 17, and a FIM in the lower portion of slot 17.

Type B - (9400-200-113-NA) - holds a PSC or PSC II in slot 16. A PSC works

with a PRC in the upper portion of slot 17; a PSC II does not require a separate

PRC. A FIM is held in the lower portion of slot 17. If used in an expanded

peripheral node, it must be used as the slave cabinet and includes a Peripheral

Interconnect card in slot 16.

Peripheral Cabinet II - (9400-200-118-NA) - holds a PSC II in slot 16, a FIM in

slot 17, and if used in an expanded peripheral node as the master cabinet a

Peripheral Interconnect card in slot 16B. If used as the slave cabinet, a Periph-

eral Interconnect card is installed in slot 16 (no PSC or FIM required).