Technical information

Technician’s Handbook

Analog Devices Connected to an AIM

Before You Begin

Program Class of Service, Interconnect Restriction, and

Intercept Handling (see page 47).

To program analog devices connected to a Mitel Networks

5422 Analog Interface Module:

1. System Configuration form

! Program a DNI line card.

2. DNI Circuit Assignment form

! Program set type against channel #1 of the circuit.

! Program the AIM against channel #2 of the circuit.

3. ONS/OPS Circuit Descriptor Assignment form

! Change circuit descriptor contents (if required).

! Change the transmission parameter to SHORT.

4. Single Line Set Assignment form

! Assign a directory number, circuit descriptor number,

and interconnect number to the circuit.

5. Default Account Code Definition form (Optional)

! Create a default account code number that will

appear in all SMDR records for the station.

6. Station Service Assignment form

! Assign the telephone’s directory number a Class of

Service, Class of Restriction, and Intercept Number.

! (Optional) Assign a Default Account Code Index

Number.