Technical information

Programming

Multiline Telephones

Before You Begin

Program Class of Service, Interconnect Restriction, and

Intercept Handling (see page 47).

1. System Configuration form

! Program a COV or DNI line card.

2. DNI Circuit Assignment form

Note: This step does not apply to SUPERSET 4 telephones.

! Program the set type to channel #1 of the circuit.

! If the telephone connects to a PKM, program the

PKM to channel #2. If the telephone connects to an

analog device, program the AIM to channel #2.

If you program the AIM to channel #2, you must also

program the connected analog devices. See Analog

Devices Connected to an AIM on page 54.

3. Multiline Set Assignment form

! Program a prime directory number and an

interconnect number to a line circuit.

4. Multiline Set Key Assignment form (Optional)

! Assign a directory number (line appearance) or

feature to each key.

! Assign each line appearance a ring type.

5. Multiline Set Group Assignment form (Optional)

! Change the ring type at each telephone where the

number appears.

! Change the group type from “key system” to

“multicall” or vice versa.