Technical information

Programming
61
Programming
Moving a Telephone User
Use the MOVE USER command to move a user from one
telephone to another. Enter the command in the following
format:
MOVE USER <station A’s extension #> TO <station B’s
extension #>
MOVE USER <Station A> TO <Station B>
Stn A = attribute of Station A before the move
Stn B = attribute of Station B before the move
Telephone Features Station A Station B
The following attributes change at both sets:
Name
deleted Stn A, Stn B
Department
deleted Stn A, Stn B
Location
deleted Stn A, Stn B
Default Account Code
deleted Stn A
Personal Speedcalls Allocated
deleted Stn A
Personal Speedcalls Used
deleted Stn A
Personal Speedcall Numbers
deleted Stn A
The following attributes change only at Station B:
Intercept Number
same Stn A
Interconnect Number
same Stn A
Class of Service
same Stn A
Class of Restriction
same Stn A
The following attributes remain unchanged at both sets:
Directory Number
same same
Circuit Descriptor
same same
Hunt Group Pilot Number
same same
Pickup Group Number
same same
Station Hotline Number
same same
Associated Data Line Number
same same
Call Announce Number
same same
Call Rerouting
same same
Button Speedcalls
same same
Call Forward Settings
same same
Message Waiting
same same
Do Not Disturb
same same
Auto Answer
same same
Baud Rate / Parity
same
same