Technical information

Technician’s Handbook
62
Swapping Users’ Telephones
Use the MOVE SWAP command to swap two users’
telephones. Enter the command in the following format:
MOVE SWAP <station A’s extension #> WITH <station B’s
extension #>
MOVE SWAP <Station A> WITH <Station B>
Stn A = attribute of Station A before the move
Stn B = attribute of Station B before the move
Telephone Features Station A Station B
The following attributes are exchanged between the sets:
Directory Number Stn B Stn A
Name Stn B Stn A
Department Stn B Stn A
Location Stn B Stn A
Default Account Code Stn B Stn A
Personal Speedcalls Allocated Stn B Stn A
Personal Speedcalls Used Stn B Stn A
Personal Speedcall Numbers Stn B Stn A
Intercept Number Stn B Stn A
Interconnect Number Stn B Stn A
Class of Service Stn B Stn A
Class of Restriction Stn B Stn A
Call Rerouting Stn B Stn A
Hunt Group Pilot Number Stn B Stn A
Button Speedcalls Stn B Stn A
Call Forward Settings Stn B Stn A
Message Waiting Stn B Stn A
The following attributes remain the same at both sets:
Circuit Descriptor same same
Pickup Group Number same same
Station Hotline Number same same
Associated Data Line Number same same
Do Not Disturb same same
Auto Answer same same
Baud Rate / Parity same same