Technical information

Programming
65
Programming
Programming Trunks
Analog Dial-in Trunk
Before You Begin
Program Class of Service, Interconnect Restriction, and
Intercept Handling (see page 47).
1. Trunk Circuit Descriptor Assignment form
! There are several Trunk Circuit Descriptor
Assignment forms. Use the specific form for the type
of trunk that you are programming, to create a Trunk
Circuit Descriptor.
2. Trunk Service Assignment form
! Create a trunk service number:
— Assign a class of service.
— Assign a class of restriction.
— Leave the Answer Points columns blank.
— To absorb no incoming digits, set the Absorb
column to 0. Do not leave it blank.
— To absorb n digits, enter n (n =a whole number)
in the Absorb column.
— To insert no digits, leave the Insert column blank.
— To insert digits, enter the actual digits to be
inserted in the Insert column.
— (Optional) Assign a trunk label to appear on
display telephones and attendant consoles
during incoming and outgoing calls.